SM-G610F Samsung Galaxy J7 Prime OSv8.1.0 Full EMMC Dump F64 Box For Deadboot Fix By RJ MOBILES
Samsung Galaxy J7 Prime (SM-G610F) OS 8.1.0 Full EMMC Dump File (F64 Box) – 100% Tested Dead Boot Repair [Free Download]
Download the Samsung Galaxy J7 Prime (SM-G610F) Full EMMC Dump file, specifically read using the F64 Box. If your device is completely dead, stuck in emergency download mode, or suffering from a corrupted EMMC partition due to a bad flash, this tested dump file will restore the bootloader and bring your phone back to life.
File Specifications
Device Name: Samsung Galaxy J7 Prime
Model Number: SM-G610F
Android Version: OS v8.1.0 (Oreo)
Supported Tool: F64 Box (Also compatible with Easy JTAG Plus, UFI Box, and Medusa Pro)
File Type: Full EMMC Dump (Boot1, Boot2, ExtCSD, Userarea)
Purpose: Dead Boot Repair / EMMC Replacement / Partition Fix
Credits: RJ MOBILES
Price: Free
What Issues Does This File Fix?
Dead boot after flashing wrong or corrupted firmware.
Device not powering on and showing no charging sign.
Stuck on Samsung logo or bootloop caused by damaged boot partitions.
EMMC replacement or reprogramming on a dead motherboard.
Phone only detected as Exynos USB Booting / Samsung HS-USB port on PC.
How to Write the EMMC Dump (F64 Box)
Backup First: Before writing any files, always take a full backup of the device's original EFS / Security partitions (if readable) to preserve the IMEI and baseband.
Prepare EMMC: Connect the EMMC chip via ISP pinout or directly to the F64 Box socket. Identify the chip and erase/factory reset it if necessary.
Load Partition Files:
Load the ExtCSD file to configure the boot partition sizes.
Select and load ROM2 (Boot1) and ROM3 (Boot2).
Load the ROM1 (Userarea) dump file.
Write Dump: Click Write and wait for the process to finish completely without interruption.
Flash Official Firmware: Once the dump is written, assemble the phone, boot into Download Mode (
Volume Down + Home + Power), and flash the complete 4-file official firmware (BL, AP, CP, CSC) for SM-G610F using Odin.Restore Security: Write back your backed-up EFS/Security file and repair the IMEI/Network if needed.
📌 Important Note
- ✔️ 100% Tested FREE File by RJ MOBILES
- ✔️ Best for Dead / Hard Bricked Devices
- ✔️ Must Match Exact Device Model
- ❌ Wrong flashing may damage device permanently
- ✔️ 100% Tested FREE File by RJ MOBILES
- ✔️ Best for Dead / Hard Bricked Devices
- ✔️ Must Match Exact Device Model
- ❌ Wrong flashing may damage device permanently
File Download Link 👇👇👇👇
File Password: RJMOBILES
📞 Contact / Support:
WhatsApp: +92 309 0454545
File Password: RJMOBILES
WhatsApp: +92 309 0454545
Important Notes
Ensure your ISP connections (CLK, CMD, DATA0, VCC, VCCQ, GND) are clean and properly soldered before starting.
Always match the exact model number (SM-G610F) before writing to avoid hardware mismatches.
Use a good-quality USB cable and maintain a stable power supply during the EMMC programming process.
Ensure your ISP connections (CLK, CMD, DATA0, VCC, VCCQ, GND) are clean and properly soldered before starting.
Always match the exact model number (SM-G610F) before writing to avoid hardware mismatches.
Use a good-quality USB cable and maintain a stable power supply during the EMMC programming process.


Comments
Post a Comment